Author Topic: HDR10+ ...Hoh Day Rioaz!!!  (Read 3222 times)

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #15 on: August 19, 2018, 18:22 »
Wow nice... Will give a good fight w DV

bro, Dolby Vision no fight with this one........ Trust me.... Just play this on your OLED.....

Offline francis wu

  • Trade Count: (+5)
  • Full Member
  • Posts: 15415
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #16 on: August 19, 2018, 18:35 »
Slight benefit with optic HDMI cable, FIBBR ones. I tested it and returned it. I didnt use it, not worth the price $ for me. But overall im just using a normal certified HDMI 2.0 cable. Good enough in my opinion, <$10 only from amazon, 0.5m

Well, if you on a short run and wants the best PQ on your display, buy the Palic Sapphire HDMI using silver strands, not cheap but seeing is believing.
You can practically see the tiny hairs on the back of her hand.....just awesome on the Oled screen :D



Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #17 on: August 19, 2018, 18:48 »
wow nice, how much is that 1m cable.... im waiting for 2.1 version, i believe in higher bandwidth capable HDMI cables.... Decent built quality.... Thanks for the Aiborg recommendation, im still using it till today, awesome cable... 5 years now.....

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #18 on: August 19, 2018, 18:52 »
Quote from the guys at Tekno, brilliant Video Encoding material:

As any old member knows, we were in constant development on how to transfer SDR content ( or Blu-ray SDR ) to PQ ST 2084 Rec. 2020 HDR10 the same identical way as movie studios.
Nobody else in the planet can do it yet except of course the big studios colorists. There's only one possible way to do it right, so it takes a lot of time to figure this out.

With the recent P3 D65 setup we have found that studios prior to the main re-grade work use the Rec. 2020 &gt; BT. 2020 with just metadata set P3 mapping. This changes the output dramatically when in Davinci Resolve. We were always doing it thinking the mapping to P3 was inside Resolve, but it's not. When properly set,  the result is a really higher quality HDR stream in any term ( color accuracy and palette is one of the biggest changes ).

Our last RPO transfer shows this incorrectly. We discovered this with Rampage movie, where trying this proper color setup, both the UHD and our SDR&gt;HDR-X conversion was identical in any aspect when setting the HDR grading to 1000 nits ( same as UHD Disc of Rampage ). So, this means we finally have the way studios transfer to HDR the movies , from here we can just use lut nit transform to do 4000 nits to any movie or video in Rec. 709 SDR  ( and even more nits when most TV are capable of this, plus we can also use the BT. 2100 color making us future proof ).

We wanted to inform this as the current RPO is still in beta stage. Now that we have everything as always intended, we are proud to announce that our tracker will now read INTERNAL UHD DYNAMIC ADVANCED COLOR HDR10 TRANSFER to any release, among with the category changed to INTERNAL UHD VISIONPLUSHDR-X TRANSFERS. Rampage and any other movie coming next will feature a really higher quality video than anything you have seen before ( trust us on this ). Comparisons will be also posted on forum and main tekno site for any transfer we do from now on to fully showcase the final HDR-X grading IQ.

Thanks to all our members for the patience and support on our development. Happy days are coming!

Offline francis wu

  • Trade Count: (+5)
  • Full Member
  • Posts: 15415
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #19 on: August 19, 2018, 19:01 »
wow nice, how much is that 1m cable.... im waiting for 2.1 version, i believe in higher bandwidth capable HDMI cables.... Decent built quality.... Thanks for the Aiborg recommendation, im still using it till today, awesome cable... 5 years now.....

Like I said, not cheap if you want the best but the price will drop and if you get it in Shenzhen it will be cheaper....(HK$)
1 M - 1800
1.5 M - 2250
 :)

Offline francis wu

  • Trade Count: (+5)
  • Full Member
  • Posts: 15415
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #20 on: August 20, 2018, 09:17 »
Btw, the picture above is not a poster, it’s actually taken with my S8 at the Palic booth demoing their cables.  I was at awe looking at the clips they showed :)
« Last Edit: August 20, 2018, 19:30 by francis wu »

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #21 on: August 20, 2018, 19:08 »
I did some test on hdmi cables, in my opinion, the differences are subtle. A good well built cable does make a difference, but the price is hard to justify. I find calibrating the screen brought out 40% improvement vs swapping out the hdmi cable.
Among all, I find the most significant upgrade is the power conditioner. I’m using the one sold by James , plixir elite 3000. This POwer conditioner brought up like 50-60 difference to the entire set up, including the picture quality. The entire equipment in the chain connected to this plixir benefited from clean power. Next was the power cord, then interconnect only marginal improvement, finally speaker cables. When there is proper grounding and extremely Low noise, even the pic quality is superb

Before adding the plixir power conditioner, I was using Bada. On that power conditioner, even changing the interconnect had significant impact

Moral of the story I have learnt, power feeding in to the home is absolutely crucial. If you get clean power feeding  in, all the equipment down the chain will benefit, greatly

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #22 on: August 21, 2018, 22:55 »
https://www.youtube.com/watch?v=zjiAgZzZcoA

Next need to get my hands on this movie, Avatar in HDR10+..... beautiful, visually stunning, No Horse Run!

Sevenz, this one damn good wei.... remember to bring your HD next round.... You will enjoy it on your OLED C7

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #23 on: September 15, 2018, 15:59 »
I have a whole lot of movies collection now on Tekno3D specially encoded files. Here is one sample from Transformers Revenge of the Fallen 2009 movie, i did the cut out for this 5min clip for demo, 20mins timestamp on the actual bluray.  Even the bass is so good with the seatons with tons of deep bass, and the Dynamics with micro details on the Oppo 205 is fabulous....

Play the original bluray, then play this file, then compare the quality... Drool..... HDRX done in 4000nits, ive never seen such high quality source before. The cars look like its just gone through polishing with glass coating....The space scene, details on soundwave taking over the satellite, the look on the earth, stars. Then watch Optimus Prime Transform, the micro details and colour on screen, Superb on the OLED. Even the "grainy" picture quality is not present like i used to watch on my original bluray. I gotta admit im kinda being dissuaded here to move on to Projector after watching all these Tekno3D quality source files...

The source is important, i believe HDMI 2.1 with 48g bandwidth will make a discernible impact.... Imagine this, if you have a very good OLED tv, but the source is from streaming, you wont enjoy the quality.. With ample bandwidth, feed that OLED with all the metadata.... It will shine....

Enjoy this short clip on a HDR capable OLED TV, PJ or other HDR capable display

https://www.dropbox.com/s/s9rytoqhqfn77a1/Demo%20Transformers.2009.Revenge.of.the.Fallen.UHD.VISIONPLUSHDR-X.4000nit-TEKNO3D.mkv?dl=0

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #24 on: September 15, 2018, 16:10 »
Any particular scene on Jurassic World Fallen Kingdom or Black Panther you wanna compare, let me know the timestamp on the UHD. I can trim that one out for test and demo purpose.

Super Duper good!🤤🤤🤤🤤

Offline Doggie Howser

  • Trade Count: (0)
  • Full Member
  • Posts: 21479
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #25 on: September 15, 2018, 16:53 »
Where to get those HDRX movies
End of Line - Derezzed

Offline whitesox

  • Trade Count: (+2)
  • Full Member
  • Posts: 1180
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #26 on: September 15, 2018, 17:00 »
Slight benefit with optic HDMI cable, FIBBR ones. I tested it and returned it. I didnt use it, not worth the price $ for me. But overall im just using a normal certified HDMI 2.0 cable. Good enough in my opinion, <$10 only from amazon, 0.5m

Usually, the only problem will happen when using 4K PJ with a longer cable (> 8 m).... TV has internal amplification.

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
Re: HDR10+ ...Hoh Day Rioaz!!!
« Reply #27 on: September 15, 2018, 18:02 »
Where to get those HDRX movies

Private trackers, Google tekno3d, it will bring you there....  damn awesome quality... u will enjoy


Sent from my iPhone using Tapatalk

Offline ronildoq

  • Trade Count: (+2)
  • Full Member
  • Posts: 1098
HDR10+ ...Hoh Day Rioaz!!!
« Reply #28 on: September 15, 2018, 20:37 »


Some very nice details on Optimus prime, can even see the turbine like blue lights on his shoulder, don’t remember seeing that type of details ....

Check out his ears on the right, there is also like 3 small holes, like a big earphone ... so good all the details, when pic quality matches the sound, bass, and on screen image, it is very immersive.

There is also another scene, when the all spark dropped in the kitchen and where one of the deception in the kitchen, actually farted, releasing , didn’t pick that up last time....


Sent from my iPhone using Tapatalk
« Last Edit: September 15, 2018, 20:41 by ronildoq »

Offline YANG

  • Trade Count: (0)
  • Full Member
  • Posts: 3664
  • I'm a llama!