Author Topic: Momitsu V880 users - help!  (Read 2520 times)

Offline redryder

  • Trade Count: (0)
  • Full Member
  • Posts: 1535
Momitsu V880 users - help!
« on: June 20, 2004, 22:28 »
I was trying to configure the momitsu to DVI out. At the moment it is on component out, and the DVI out is greyed out. In the component out submenu, there are the various resolutions (480, 720 and 1080) and also there is an "off" item. Thinking that I had to turn component out "off" first before activating DVI, I selected "off". The picture on my TV went blank. Connected the DVI but still blank. Now I can't get any picture up on the screen anymore, whether with component, composite, s-video or DVI. How???

Offline Audioache

  • Trade Count: (0)
  • Full Member
  • Posts: 174
Re:Momitsu V880 users - help!
« Reply #1 on: June 20, 2004, 23:22 »
You need to turn on dvi by keying in the right key sequence on the remote so that the correct dvi setting is selected in the setup screen, have to guess a bit since you can see anything on screen now. Refer to the section on momitsu on Video setup, the should be a section that says something like:

"If you turn the HD Component/DVI On with the TV hooked up via S-Video or composite video connections, the on-screen menu will no longer be visible. If this happens, unplug the DVD-V880, plug it back in, turn it on, and enter the following remote control command sequence: Setup, [series of up,down,left,right arrow sequence] etc follow by enter"

You can follow the instructions in the maual but the [series of up,down,left,right arrow sequence] could be different depending on your firmware version. Pressing setup, down, right should bring you to the first item in video setting. From here you need to move to "dvi  out" and select a dvi resolution.

But this is where the sequence could be different. In my manual for video setup, component out preceeds dvi out followed by tv out. But the actual menu in my player is dvi out, component out and lastly tv out. The lastest vesion has only hd/dvi out followed by tv out. Do you remember which item is dvi out  in your video setting menu? else you will need to try a few time to get it right. Hope I'm not confusing you further ;)
Onkyo SR875 - Yamaha RVX1400 - Toshiba A35 - Sony PS3 60gb - PCH C200 - HDX-900/1000 - TViX M4000 - Singtel MIOTV - StarHub HD STB - Energy Take 5.1 - Energy Connoisseur C3 - Wharfedale Pacific Evo 30 - SVS PB10 - Panasonic AE500 - Pioneer 428XG - Panasonic VT20S

Offline desray

  • Global Moderator
  • Trade Count: (+4)
  • Full Member
  • *
  • Posts: 17381
  • Bring the "Cinema experience" back home...
Re:Momitsu V880 users - help!
« Reply #2 on: June 21, 2004, 00:52 »
Very easy lar...just press the (VIDEO-OUT) button several times...until you get a video signal...from press setup button again and do a proper configuration.

That's easy, rite?  ;)